Let’s Take A Look At The  5-in-1 Weather Sensor

 

 The 5-in- Weather Sensor is the brain of this Weather Station. This sensor hub collects and sends information to your High Resolution Weather Station HD Display. It will transmit 
your accurate Rainfall amounts through the Rainfall Collector Funnel, equipped  with a
Debris Filter to keep junk from your rain collector funnel.

The  Internal Temperature and Humidity Sensors are in inside but provide accurate
results that are sent to your HD Display. There is also a Internal Aspirating Fan that
draws ambient air into the sensor to reduce solar radiation heating, resulting in more accurate  temperature measurements. This sensor also has a Wind Speed Anemometer
that provides accurate wind speed measurements.

This sensor comes with a mounting bracket  that allows you attach your 5-1 Sensor
in just about any location, but for the best results you do not want to have something 
that would block you wind reading . To get the ideal reading, you should mount your
Sensor at least 5ft off the ground in an open area and the National Weather Service
recommends that you mount it 33 ft high for optimal performance

The Sensor requires 4 AA Batteries, so before any mounting is done make
sure your batteries are installed. A high quality Alkaline or Lithium batteries
are the best for performance. Re-chargeable batteries are not recommend 

The 5 -IN-1 Pro Weather Station comes with a Lightning Detector Sensor.

The Display collects date sent to it from the 5-in-1 Sensor along with the Lightning